FAQs

Where can I put the oil tank?

To comply with current OFTEC guidelines and building regulations, the tank must be sited a minimum of 1.8m from any building or combustible material (including sheds, trellising, etc), and 760mm from the property boundary. During the site visit we will discuss with you the options available.

Can I put my new tank back in the same position?

Yes, if this complies with OFTEC guidelines and current Building Regulations.

Do I need planning permission?

If the tank is being sited into the front 25% of your property or your property is Listed then permission may be required. It is always best in these circumstances to contact your local Building Control office to check as each region may differ slightly.

Can I install the tank underground?

We would always recommend that your oil tank is sited above ground to ensure you can detect any damage or failure early.

Do I need a builder to prepare the new tank base?

No, we provide the complete service, including all base works, and running of any new oil supply lines.

What size tank do I need?

During the initial site visit, your oil usage and the size of the property will be assessed and discussed with you to determine the most suitable tank size for your needs.

Should I choose a plastic or steel tank?

There are a wide range of options available, and we will discuss the options with you, and recommend the most suitable tank for your requirements.

Do I need a bunded tank?

We will carry out an OFTEC Risk Assessment as part of the initial site visit to determine if secondary containment is necessary. 

How often do I need to refill my tank?

Most households refill once or twice a year, depending on the tank size and usage. Our tanks are supplied with an electronic gauge for ease of fuel monitoring. We can also fit manual clock gauges on a selection of our plastic tanks.

What maintenance does my tank need?

To comply with manufacturer’s warranty guidelines, your new tank should be inspected annually. We offer a simple annual service plan to carry out a visual inspection of your tank, tank base, oil line, and all working components. We will also check for any water contamination to the oil, and discuss any concerns you may have.

What happens to my old tank?

We will remove your old tank and safely dispose of it for recycling.